Compatibility guides

Mask magnets: check the wearer and close contacts

A mask name alone does not identify its magnetic components.

Mask magnets: check the wearer and close contacts
Image source: Resmed · Product image from the linked manufacturer or accessory-brand source. Copyright remains with the source owner; used for product identification without endorsement or a compatibility guarantee.

A mask name alone does not identify its magnetic components. Resmed’s guidance covers the wearer and anyone in close physical contact during use, including a bed partner. Its contraindications include active implants that interact with magnets and metallic implants or objects containing ferromagnetic material. Ask the implant manufacturer and your clinician when the exact device is uncertain.

Resmed also specifies at least 150 mm (6 inches) between mask magnets and implants or medical devices that magnetic interference could affect. This separation warning does not cancel a contraindication. If a contraindication applies, arrange an appropriate mask without magnets with your provider; if one is unavailable, ask your clinician about the next steps for therapy.

The FDA describes the affected Resmed mask recall as a labeling correction rather than product removal. Check the current notice, exact mask version and local instructions. CPAP.buzz lists explicitly named non-magnetic F20 and F30i versions separately and does not infer that every similarly named mask has the same clips.

Primary references

How this was written

Original CPAP.buzz editorial analysis of the linked primary sources, checked 13 September 2026. Practical comparison points are editorial inferences; no hands-on testing or clinical evaluation was performed.

No payment, review sample, affiliate price or manufacturer score was used to create this article. Any product image identifies its related catalog entry and does not imply endorsement.

Suggest a correction